How to cut laminate flooring

Not every room is the same size or shape, so if you’re
installing laminate flooring, you’ll likely need to cut it to fit.

In this guide, we’ll talk about how best to cut laminate
flooring, including which tools you will need.

What is laminate flooring?

Laminate flooring is multi-layered synthetic flooring made
with a lamination process. It’s designed to simulate real wood or stone, with a
photographic effect added to the outer layer to give it this appearance. The
inner layers are usually made from melamine resin and fibre board.

It’s easier to install and maintain than traditional
hardwood flooring and is often a lot cheaper.

Is it hard to cut laminate flooring?

If you have the right tools, it’s actually quite easy to cut
through laminate flooring, and can easily be done by people with a little DIY
skill.

You’ll likely be cutting boards straight to fit the edges of
the room, as well as curved or angle cuts to go around features such as toilets
or fireplaces.

What’s the best saw for laminate flooring?

The best saws to cut laminate flooring are a jigsaw, crosscut saw (also called a plunge saw), or a handsaw. A jigsaw is usually the most versatile tool, as it lets you cut the flooring to fit unusually shaped objects like a toilet or pillar.

For simple straight cuts, you can easily use a handsaw to
cut laminate flooring if that’s all you have, but for the most professional
finish, you should choose a crosscut saw or table saw.

If you’re planning on cutting out angles or curves (such as
around a toilet), then you should use a Jigsaw. Make sure it has a fine tooth
blade.

What tools do you need when cutting laminate flooring?

Apart from the saw, you’ll also need to get the following:

Straight Edge/Ruler

A straight edge tool is designed to increase your measuring and marking accuracy,
providing a precision-engineered edge, as well as finger-protection for scoring
lines with sharp objects.

Steel straight edges give you a reassuringly heavy feel when marking lines on
your laminate flooring, helping to improve your accuracy and prevent mistakes.

Aluminium straight edges on the other hand are lightweight, with a non-slip backing
to prevent slipping accidents, with a recessed area to protect your fingers (if
cutting using the straight edge as a guide).

Pencil

You’ll need something that’s easy to wipe off to mark the
place you intend to cut on your laminate flooring, a pencil is ideal.

Clamp/Vice

It’s far easier to saw through the laminate flooring when
you have the piece clamped in place. Any clamp or vice that’s non-marking will
likely be fine, but make sure you test it on an offcut piece first just in
case.

Sandpaper

You’ll likely need sandpaper to finish off the cutting edges
of your laminate flooring to give you a nice clean finish.

How to cut laminate flooring with a handsaw

1. Safety – make sure you’re wearing goggles,
gloves, and have a clean work surface before starting your cutting.

2. Mark your cutting point on the flooring with a
pencil, then finish the line using your straight edge as a guide.

3. Clamp the piece of flooring in place over a flat
surface, with the cutting edge lining up as close to the edge of the surface as
possible. The best situation is to clamp it from both ends, but that’s not
always possible.

4. Make a small cut in the flooring first, by
drawing the saw backwards over your cutting line.

5. Start sawing until you’ve finished the cut
(ensure your hands are well away from the saw blade).

6.Sand the cut edges of flooring to achieve the
desired finish.

How to cut laminate flooring with a crosscut/table saw

1. Safety – make sure you’re wearing goggles,
gloves, and have a clean work surface before starting your cutting.

2. Mark your cutting point on the flooring with a
pencil, then finish the line using your straight edge as a guide.

3. Clamp the flooring in place on your saw with the
cutting line directly over the saw line marker.

4. Start the saw, then bring it down and through
your cutting line (ensure your hands are well clear of the cutting blades).

5. Sand the cut edges of flooring to achieve the
desired finish.

How to cut laminate flooring with a jigsaw

1. Safety – make sure you’re wearing goggles,
gloves, and have a clean work surface before starting your cutting.

2. Mark your cutting shape on the flooring with a
pencil. Sometimes this is easier if you physically trace the shape you need on
paper first, then overlay this onto the piece of flooring before cutting.

3. If possible, clamp the other end of your
laminate flooring to a bench or work surface, leaving just the cutting pattern
over the edge. The best situation is to clamp it from both ends, but that’s not
always possible.

4. Keeping your hands well clear, start the jigsaw
and approach the edge of the flooring, cutting the shape out slowly.

5. You should test the teeth direction beforehand
to understand which direction you need to cut to leave yourself with a nice
finish (you may need to flip the piece of flooring to achieve this).

6. Sand the cut edges of flooring to achieve the
desired finish.

Can you cut laminate flooring without chipping it?

The key to cutting through laminate flooring without
chipping it, is to use a fine tooth blade. Some recommend at least 18 teeth per
inch on a hand saw to prevent chipping, whilst others recommend at least a 30
teeth per inch blade for a jigsaw.

As an extra precaution against chipping, you can add
painter’s tape over the cutting line on your flooring, then mark again on top,
and cut directly through the tape.

Can you cut laminate flooring with a Stanley knife?

It’s not recommended to cut laminate flooring with a Stanley
knife, as the blade is at risk of snapping under the increased pressure.

Do you cut laminate flooring face up or down?

The majority of the chipping occurs when the saw blade is on
the way back up, so you should consider this when deciding which way you should
cut your flooring. Circular saw blades don’t have this problem, but jigsaw
blades do.

Interested in cutting pliers?

If you need a new tool to repeatedly cut through wire, then click here to shop cutting pliers.

You can also learn about how to use a straight edge here.

Why not invest in a Maun Platinum DIY Kit order here.

Conclusion

We hope you found our post on cutting laminate flooring useful.

If you have any questions, feel free to contact us via email or phone.

Want to read more? Browse our related articles below:

• What is an Olive Cutter
• What are Diagonal Cutting Pliers?
• What are End Cutting Pliers?
• What are Fencing Pliers and How to Use Them
• How to Cut Hard Wire?
• Best Wire Cutters
• Best Side Cutters
• Best End Cutters
• How to Cut Up Mattress Springs
• How To Cut Wire with Pliers