Hex Bolts A307 and A307B

We keeps ASTM A307 and A307B hex bolts in stock. We also stock the ASTM A563 Hex Nuts (Heavy and Finish) to go with these bolts.

ASTM A307 SIZES & SPECIFICATIONS
The ASTM A307 specification covers carbon steel bolts, rods/studs and anchor bolts ranging from 1/4″ through 4″ diameter. This is your everyday, run of the mill bolt specification often manufactured using A36 round bar. They have a low hardness and tensile requirements and are generally used in low-pressure, standard or normal temperature applications There are three grades A, B, and C* which denote tensile strength, configuration, and application.

Hex Bolts A307 and A307B

You will often hear about A307 and Grade 2 bolts as being equivalent. While they are small differences they each are referred to as “low carbon” fasteners. A307 is an ASTM (industrial) spec, while Grade 2 is an SAE J429 Grade 2 (automotive) spec.

WE CARRY A FULL LINE FINISHED IN
Plain
Zinc
Hot-dipped galvanized.

A307 GRADES

A
ASTM A307 Grade A
Headed bolts, threaded rods and bent bolts intended for general

B
ASTM A307 Grade B
Heavy hex bolts and studs intended for flanged joints in piping systems

C*
ASTM A307 Grade C
Non-headed anchor bolts, either bent or straight, intended for structural anchoring purposes. It should be noted that as of August 2007, grade C has been replaced by specification F1554 grade 36.

A325TC Heavy Hex Bolt with Flat and Washer

A325TC Heavy Hex Bolt with Flat and Washer, ASTM A325TC Heavy Hexagonal Bolts, Structural (Heavy Hex Bolts, TC), heavy construction Structural Tension Control Bolts – A325M Twist-off Bolts, Hex Cap Screws heavy hex structural bolts China Supplier Product name A325TC Heavy Hex Bolt with Flat and Washer Standard ASTM A325TC Heavy hex bolt with flat […]